AGI-X007C Series

Curve Glass Inspection

AGI-X007C Systems provide automotive glass manufacturers with a final inspection solution before the glass is shipped to the automotive manufacturers. These systems not only allow manufacturers to guarantee the quality of their products, but also increase their productivity by reducing the number of inspectors required at the end of the production line. AGI-X007C systems provide complete surface, body and paint inspection.

AGI-X007C   F E A T U R E S

• Complete surface and body defect detection and classification
• Paint inspection (logo position)
• Dark tint and clear glass processing (6% to 92% transmissivity)
• Adjustable pass/fail specification settings
• Quality and exclusion zones
• Automatic changeover and calibration
• Yield management and process control data

K E Y B E N E F I T S

• Offers continuous, fully automated, non contact inspection at line speeds up to 1 m/second
• Allows a minimum cycle time of 2.3 seconds
• Detects, measures and classifies a wide variety of glass defects including scratches, pits, bubble, stones, edge chips, rim distortion, adhesion chips, paint defects, etc.
• Reduces process waste via repetitive defect alarms
• Eliminates the need for inconsistent, slow and expensive human inspection
• Enables a fast return on investment
• Captures key data for process improvement